The RTD800 is a flanged RTD sensor with an integral extension piece and connection head. There is a wide variety of flange sizes and ratings available including RF, FF and RTJ configurations.
The RTD800 temperature sensor is available as a 2, 3 or 4 wire Pt100 or Pt1000 in either simplex, duplex or triplex configuration. The accuracy class can be selected from 1/10 DIN, 1/5 DIN, 1/3 DIN, class A or class B.
This RTD assembly is available with an aluminium, stainless steel or plastic connection head which has a M20 x 1.5 cable entry. The sensor can be terminated with a ceramic terminal block, 4 to 20 mA transmitter or supplied with tails. There is also an option to specify loop powered or battery powered indicator.
The RTD800 RTD temperature sensor is available with optional ATEX Exia (intrinsically safe), ATEX Exd (flameproof) or IECEx Exd (flameproof) hazardous area approval for use within Zones 0, 1, 2, 20, 21 and 22.
The RTD800 has an available temperature range between -196°C and +650°C.
If the options provided by our industrial range don’t meet the precise requirements of your application, call our experts on +44 (0)1243 866 866 for a no-obligation consultation about a bespoke solution.
|RTD Sensor||Pt100 • Pt1000|
|Sensor Configuration||Simplex • Duplex • Triplex|
|Sensor Wiring||2 Wire • 3 Wire • 4 Wire|
|Sensor Class||Class B • Class A • 1/3 DIN • 1/5 DIN • 1/10 DIN|
|Approvals||ATEX Exd II 2 GD • IECEx Exd II GD • ATEX Exia II 1 GD|
|Connection Head||Aluminium • 316 Stainless Steel • Plastic|
|Termination||Terminal Block • Temperature Transmitter • Tails|
|Indicator||Battery Powered • Loop Powered|
|Flange Size||1" • 1.5" • 2" • 2.5" • DN25 • DN40 • DN50 • DN80|
|Flange Rating||150lb • 300lb • 600lb • 900lb • 1500lb • PN16 • PN25 • PN40|
|Flange Type||Raised Face (RF) • Flat Face (FF) • Ring Type Joint (RTJ)|
|Design Temperature||Low (-196°C to +100°C) • Standard (-50°C to +250°C) • High (-50°C to +650°C)|
Our staff are fully trained to offer comprehensive, and specialist advice on our range of products. Whether you’re not sure what you’re looking for, or you need something highly specialised, give us a call and we’ll be happy to discuss your requirements.
Send us your details and we’ll be happy to call you back at a time that suits you.
Our team of highly trained calibration engineers are able to provide UKAS trac…
The RFA501 is a temperature assembly combining a spring loaded RTD sensor with…